Overhead stirrer

Models

AM 20-D ARGOlab Overhead Stirrer capacity 20LT.

Mechanical stirrer rod with LED display. Maximum stirring volume 20 L. Stirring speed adjustable from 50...2200 rpm with a power of 70 W. Maximum viscosity 10000 mPa*s. Green / red luminous indication of motor block due to overload. Upper passage hole for stirring rods (Ø 0.5 ... 10mmm). Supplied complete with mandrel (soft anti-contamination rubber cap) and relative key. Degree of protection IP21. 220V power supply.
Supplied without universal support (see code 22005153).


In the CGS system, 1 mPa*s = 1 cP (centipoise).
The Poise is the unit of measurement in the CGS System of dynamic viscosity, corresponding in the SI to the poiseuille [PI].
For historical reasons it is more common to use the submultiple centipoise [cP], which is equivalent to millipoiseuille.
The centipoise is the order of magnitude, in CGS units, closest to the viscosity of water H2O, under normal conditions.

AM 40-D Pro Overhead Stirrer capacity 40LT.

Mechanical stirrer rod with LCD display. Maximum stirring quantity 40 L. Effort control with automatic speed adjustment. Adjustable stirring speed from 50…2200 rpm with a power of 100 W. Maximum viscosity 50000 mPa*s. Torque indication. Luminous indication of motor block due to exceeding of the maximum torque (N*cm). Upper passage hole for stirring rods (Ø 0.5 ... 10 mm). Supplied complete with mandrel (soft anti-contamination rubber cap) and relative key. Degree of protection IP42. 220V power supply.

Supplied without universal support (see code 22005153).


In the CGS system, 1 mPa * s = 1 cP (centipoise).

The Poise is the unit of measurement in the CGS System of dynamic viscosity, corresponding in the SI to the poiseuille [PI].

For historical reasons it is more common to use the submultiple centipoise [cP], which is equivalent to millipoiseuille.

The centipoise is the order of magnitude, in CGS units, closest to the viscosity of water H2O, under normal conditions.

Accessories

Support for overhead AM 20-D and AM 40-D Pro ARGOlab

Universal support for Argolab overhead stirrers.

Base dimensions: 200 x 315 mm
Rod length: 800 mm, Ø 18 mm

Complete with clamp.

Shaft Type 3 - ARGOlab Cross Stirrer

Stirring rod (Type 3) with helix.

Material: 316L stainless steel
Rod length: 400 mm
Rod diameter: Ø 8 mm
Stirring width: 5 cm

For standard stirring at medium and high speeds.

Shaft Type 2 - ARGOlab Straight Stirrer

Stirring rod (Type 2) with fixed blade.

Material: 316L stainless steel
Rod length: 400 mm
Rod diameter: Ø 8 mm
Stirring width: 6 cm

For low viscosity media at medium and high speeds.

Shaft Type 4 - ARGOlab Blade Stirrer

Stirring rod (Type 4) with 3-hole blade.

Material: 316L stainless steel
Rod length: 400 mm
Rod diameter: Ø 8 mm
Stirring width: 6.8 cm

For gentle mixing at low and medium speed.

Shaft Type 1 - ARGOlab Centrifugal Stirrer

Stirring rod (Type 1) with floating blades.

Material: 316L stainless steel
Rod length: 400 mm
Rod diameter: Ø 8 mm
Stirring width: 9 cm

Blades open during speed. 
For narrow-necked containers at medium-high speed.

Shaft type 5 - ARGOLAB Grand Anchor Stirrer L = 60

Anchor stirring rod (Type 5), large size.

Material: 316L stainless steel
Rod length: 600 mm
Rod diameter: Ø 8 mm
Stirring width: 10 cm

For standard stirring or simple precipitation.

Shaft type 6 - ARGOLAB Grand Dissolving Stirrer L = 60

Toothed wheel stirring rod (Type 6), large size.

Material: 316L stainless steel
Rod length: 600 mm
Rod diameter: Ø 8 mm
Stirring width: 10 cm

For breaking up the granulation present in the mixture, with a strong shear force.

Shaft type 3 PTFE - ARGOlab Crossed Stirrer L = 35 cm

Stirring rod (Type 3) with helix, PTFE coating.

Rod length: 350 mm
Rod diameter: Ø 8 mm
Stirring width: 6.5 cm

For standard stirring at medium and high speeds.

Shaft Type 2 PTFE - ARGOlab Straight Stirrer L = 35 cm

Stirring rod (Type 2) with fixed blade, PTFE coating.

Rod length: 350 mm
Rod diameter: Ø 8 mm
Stirring width: 7 cm

For low viscosity with medium media and high speed.

Shaft Type 4 PTFE - ARGOlab Blade Stirrer L = 35 cm

Stirring rod (Type 4) with 3-hole blade, PTFE coating.

Rod length: 350 mm
Rod diameter: Ø 8 mm
Stirring width: 6.8 cm

For gentle mixing at low and medium speed.

Shaft type 1 PTFE - ARGOlab Centrifugal Stirrer L = 35 cm

Stirring rod (Type 1) with floating blades, PTFE coating.

Rod length: 350 mm
Rod diameter: Ø 8 mm 
Stirring width: 8,5 cm

Blades open during speed. 
For narrow-necked containers at medium-high speed.

Self-locking drill chuck for Stirrer AM 20-D and AM 40-D Pro ARGOlab

Overhead chuck for Stirrer AM 20-D and AM 40-D Pro ARGOlab

Argolab mechanical stirrer fixing clamp

Becker Stand with velcro strap and overgead chuck for AM 20-D and AM 40- D Pro ARGOlab

Beaker stand for Argolab mechanical stirrers.

Complete with strip and clamp